Wall Entry Aluminum Pet Door - Small | PetSafe
SMALL - Product Dimensions |
Pet Opening | 5"w x 7"h |
Rough Cut Required | 6 7/16"w x 10 1/8"h |
Exterior Frame | 9 1/2"w x 13 1/4"h |
Fits walls from 4 3/4" to 7 1/4" thick |
The
Petsafe Small Wall Entry Pet Door frame is constructed of sturdy aluminum and comes only in white at this time. The tunnel itself is a black solid mold plastic without corner seams. The dual flap design provides for better insulating in environments where there may be warm or cold conditions. The
flaps on this door are a translucent-tinted color and are replaceable. The slide in locking panel can be inserted on the interior or the exterior side of the pet door. The locking panel slides in from the top.
(
Note: These pet doors require a screw bolt -molly that is inserted next to the cut-out hole through the wall. For this reason the difficulty greatly increases when installing this door in a stucco or adobe exterior wall...for these types of install we recommend the
MaxSeal Wall model).
PetSafe Small Wall Entry - Dual Flap Pet Opening 5"w x 7"h Rough Cut Required 6 7/16"w x 10 1/8"h Exterior Frame 9 1/2"w x 13 1/4"h Fits walls from 4 3/4" to 7 1/4" thick
Usually ships within 24 hours
Designed to fit walls in thickness 4 3/4" to 7 1/4" No tunnel trimming necessary Tunnel slides together in sleeve action Aluminum framed pet door
Replaceable pet door flap Flap is translucent-tinted vinyl Security panel can fit on either interior or exterior side Limited Lifetime Warranty
PetSafe Wall Entry Dual Flap pet door
(small 5"x7")
