PetSafe Large Classic Flap | Model 4-0113-11
Replacement Flap for Classic Doors | Wall Entry Doors | Deluxe Patio Panels | Pet Eze Models | Greater Freedom | Deluxe 81 | Insta Panels | US Pet Products | aka 700-416
Tinted flap with embedded magnets inside vinyl at bottom
Entire flap measurement: 10 1/4"w x 15 7/8"h
As measured in Pet Door: 10"w x 15"h
The Classic Replacement flap is used in several PetSafe pet doors. Some of these models have been discontinued. The easiest way to determine if this is the replacemetn flap you need is to identify the individual magnets at the bottom of the flap. They will be embedded inside the vinyl. This is a unique characteristic for the PetSafe Classic flap. This flap is tinted and has embedded magnets at the bottom of the flap. There is a rib along the top (no-screw holes).
Note: We have attempted to provide accurate dimensions for these flaps. Keep in mind if the flap you are replacing is CLOSE to our dimensions listed, then this would be the correct replacement flap. There is a noticeable difference between sizes...so close counts when replacing your flap. These flaps have not changed in measurements over the years. If you have any questions call us at 1-800-829-7876.
Fits Several PetSafe Models
10"w x 15"h
Large Flap Size: 10 1/4"w x 15 7/8"h Flap is darker -tinted Magnets are embedded inside the rubber of the flap The PetSafe "Classic" replacement flap works with the following doors: -PetSafe classic pet door -PetSafe Deluxe Patio Panels -Original Thermo Panel - patio pet door (Patio Pacific) -Thermo Panel II patio - pet door (Patio Pacific) -Original Quick Panel - patio pet door (Patio Pacific) -Quick Panel II - patio pet door (Patio Pacific) -Pet Ez -Greater Freedom -Deluxe 81 -Insta Panels -US Pet Products
PetSafe Classic Large Flap
For 10" x 15" Pet Openings