Door
THE BEST door you can buy
I have had 2 in 17 yrs. One in our old home and one in our new home. Never an issue except I had to replace the 2 flaps one time. Guarantee you won't be disappointed. Well worth the money !
Important Note: When having a door made to a rough cut opening in a wall; it is recommended that your hole in the wall is a minimum of 1/8' larger than the rough cut dimension chosen for the custom door. |
Example 1: If the hole you are installing a pet door is 15" wide x 20" high, then you multiply 15x20=300 square inches. Look in the chart below to see what range 300 falls into for pricing. Important: your flap size will be 13"w x 18"h (there is a difference of 2" in width and height from rough-cut dimension to flap size).
Example 2: If you want a flap size of 15"wide x 20"high, then you would figure the rough-cut to be 17"w x 22" (minus 2" from each measurement because of the 2" difference between rough-cut and flap size). 17 x 22=374 square inches. Find 374 in the chart below for pricing.
Rough Cut Dimensions Square Inch Range (For pricing) Multiply width x height) |
Single Flap Door Mount |
Dual Flap Door Mount |
0-69" | $218.79 | $241.35 |
69-93" | $223.74 | $249.99 |
93-141" | $262.99 | $297.99 |
141-175" | $292.99 | $342.99 |
175-215" | $337.99 | $402.99 |
215-257" | $377.99 | $422.99 |
257-309 | $402.99 | $447.99 |
309-350" | $447.99 | $497.99 |
350-372" | $492.99 | $582.99 |
372-527" | $552.99 | $632.99 |
527-600" | $625.99 | $675.99 |
MaxSeal
Custom Made Pet Doors |
||||
Custom pet doors can be made to fit an existing cut through a door or wall
as well as to a certain flap size. Note: The flap size will always be approx. 2" less in width and height than the rough cut "hole" dimension. See calculator above for exact measurements |
||||
Pricing is determined by the size of the cut through the wall or door; |
||||
We also offer doors that are LARGER than shown on the above chart; please call us at 1-800-829-7876 for assistance.
If you need a door in a specific time frame, please call us.
|
||||
A specification / data sheet will be kept on file for reference with Moore Pet Supplies LLC & Security Boss Manufacturing LLC for any future replacement parts that may need to be ordered.
|
Pricing for these custom doors is based on Rough Cut Dimensions
(width x height of your opening = Total sq. inches in chart below)
MaxSeal Custom Made Doors
|
||