Custom MaxSeal French Door Pet Doors
For French Pane Style Doors
The MaxSeal French doors can be removed at a later time to re-install the pane of glass if you wish (excluding those that cut into the door itself). All components of the pet door are replaceable so that your door can be maintained indefinitely. These doors are of impeccable quality, rated to be among the best pet doors made. They provide a perfect seal and the best insulation. All Security Boss products are hand built to order.
MaxSeal French Doors are made to order to fit the opening created by your existing panes of glass. You can replace one or more panes of glass to make room for a pet door. Some customers even will enlarge the opening by cutting into the side or footer of the door.
For more info see Installation Variations
These doors are ordered based on the opening that they will be installed into. If you are replacing one pane of glass, simply measure the exposed glass as you see it; (This will be the opening that the pet door is installed to). If you want a larger pet door than the size panes in your door, simply measure the opening you will have (more than one pane or larger due to cutting into the side or bottom of door).
Special Note: Your French pet door will have a flap size that is 2" smaller in width & height. (Due to the frame of the door itself). If you measure your pane of glass as 10"w x 10"h, then your pet door will have a flap that measures approx. 8"w x 8"h.
|
Important Notes:
|
|
1. If you have a single panel of glass with faux partitions in your door, do not attempt to cut the glass. Most all doors (Unless very old) are made with safety glass. If you attempt to cut it, the glass will shatter
|
|
2. These doors are custom made. You will be emailed a custom sign off release that you understand these are custom made an non-refundable. Make sure of your measurements or call us for assistance.
|
|
3. Our Pet Door Experts are here to assist in anyway we can, however, the customer bears ultimate responsibility for ordering the correct item and installing properly in the appropriate door.
|
For combination colored doors
please call us at 1-800-829-7876 (No Extra Charge)
MaxSeal French Door
|
||||
|
Security Boss Manufacturing LLC is dedicated to providing products that operate beyond expectations and provide the customer with long years of satisfaction. Our products are designed so that you can maintain your pet door indefinitely.
|
||||
 
MaxSeal
|
||||||
|
Square Inch Range
(width & height of opening) |
Single Flap model
|
Dual Flap model
|
||||
|
0-69"
|
$169.99
|
$204.99
|
||||
|
69-93"
|
$214.99
|
$249.99
|
||||
|
93-141"
|
$263.99
|
$298.99
|
||||
|
141-175"
|
$293.99
|
$343.99
|
||||
|
175-215"
|
$338.99
|
$398.99
|
||||
|
215-257"
|
$377.99
|
$422.99
|
||||
|
257-309"
|
$402.99
|
$447.99
|
||||
|
309-350"
|
$447.99
|
$497.99
|
||||
|
350-372"
|
$492.99
|
$582.99
|
||||
|
372-522"
|
$552.99
|
$632.99
|
||||
|
Note: French doors with Rough Cut Dimensions LARGER than 17.75"w x 33.75" h, require a 10 day fabrication period. The Minimum Rough Cut Dimension that theses doors can be made to is 5.5" in width or height. |
||||||
|
We also offer doors that are LARGER than shown on the above chart; please call us at 1-800-829-7876 for assistance.
Custom Doors require 3-5 days for fabrication then ships via UPS. If you need a door in a specific time frame, please call us.
|
||||||
|
A specification / data sheet will be kept on file for reference with Moore Pet Supplies LLC & Security Boss Manufacturing LLC for any future replacement parts that may need to be ordered. |
||||||
Measuring for & Installing your French Door Pet Door is very simple. (You must have individual -removable panes of glass. You cannot cut an opening into a single-solid pane of glass, your entire door glass will shatter as doors are made with Tempered-Safety glass.)
ORDERING:
Step A: Measure the exposed glass pane as you see it; without removing the molding. The door made for you will have a flap that is 2" smaller in width & height. (Make sure this resulting flap size will be large enough for your pet.)
INSTALLING:
Step B: Remove the molding around the selected pane of glass where the pet door will be installed. (If you are using more than one pane, remove molding around area.).
Step C: Remove the pane of glass and put the molding back around the opening (without glass pane).
Step D: Your pet door comes apart into 2-frames. These frames sandwich the opening and adjust to the molding thickness. Drill pilot holes for screws (the 2-frames each have a lips that glide over each other to adjust to the molding thickness. Where these two lips overlap is where the pilot holes are drilled). Put screws into pilot holes and tighten.
Note: you may at a later time remove the pet door and re-install the pane of glass.
Our Price: $169.99 - $632.99
Enter Product Attributes below for Pricing
Pricing starts at: $169.99
Complete pricing chart at bottom of this page
Custom Made Pet Doors
Replaces one or More French Door Panes
Single or Dual Flap Versions
60 Reviews Hide Reviews Show Reviews
-
Great product!
I wanted a simple solution without having to cut into a door or wall. This custom French door solved my problem! Looks great and seals well even with just 1 flap. Thanks again for the great product and service!
-
Get the dual flap
The single flap maxseal has provided an excellent seal for us and has proved to be worth the price. My only regret is that I didn't get the dual flap because my dog has no problem going through the single flap and I can't imagine how much better the insulation would be. Great door!
-
Fantastic Door
We are thrilled to have a door custom made that could fit into our french door. We looked everywhere before we finally ran into your company...and what a door! Thanks guys!
-
Happy customer
We are so happy to have finally found a much needed solution to our dog being let outside. The door saves so much hassle, plus still providingexeptional insulation.
-
Top-tier insulation
This is by far the best insulating pet door, if not door we have ever had! I was a little leary about putting one in our french door at first, but wow am i glad we did it!
-
Great kitty door
Our kitty loves the door and it saves so much hassle for us. No more getting up from watching our shows jsut to let her out. I don't see us having to replace parts on this anytime soon....what a heavy duty door!
-
Wow this is big
This is such a massive door! Thank God for this door being able to be made to be such a large size otherwise we would have had one sad pooch. Excellent design also!
-
Booya!
Dang this is one awesomely huge door! I'm just glad I didn't have to put up with one of them palstic pieces of crap these other companies make. Huge door! Awesome door! Booya!
-
Great
This is a fantastic pet door. We just love how heavy duty it is and the fact that is keeps the cold air out so darn well! A must-have!
