Just the perfect size
I wanted a pet door nice and small to be as little noticed as possible and this door has definately done that. It's sleek frame and small dimensions make it virtually hidden from site which is appealing for me. Thank you!
Important Note: When having a door made to a rough cut opening in a wall; it is recommended that your hole in the wall is a minimum of 1/8' larger than the rough cut dimension chosen for the custom door. |
Example 1: If the hole you are installing a pet door is 15" wide x 20" high, then you multiply 15x20=300 square inches. Look in the chart below to see what range 300 falls into for pricing. Important: your flap size will be 13"w x 18"h (there is a difference of 2" in width and height from rough-cut dimension to flap size).
Example 2: If you want a flap size of 15"wide x 20"high, then you would figure the rough-cut to be 17"w x 22" (minus 2" from each measurement because of the 2" difference between rough-cut and flap size). 17 x 22=374 square inches. Find 374 in the chart below for pricing.
Rough Cut Dimensions Square Inch Range (For pricing) Multiply width x height) |
Single Flap Door Mount |
Dual Flap Door Mount |
0-69" | $218.79 | $241.35 |
69-93" | $223.74 | $249.99 |
93-141" | $262.99 | $297.99 |
141-175" | $292.99 | $342.99 |
175-215" | $337.99 | $402.99 |
215-257" | $377.99 | $422.99 |
257-309 | $402.99 | $447.99 |
309-350" | $447.99 | $497.99 |
350-372" | $492.99 | $582.99 |
372-527" | $552.99 | $632.99 |
527-600" | $625.99 | $675.99 |
MaxSeal
Custom Made Pet Doors |
||||
Custom pet doors can be made to fit an existing cut through a door or wall
as well as to a certain flap size. Note: The flap size will always be approx. 2" less in width and height than the rough cut "hole" dimension. See calculator above for exact measurements |
||||
Pricing is determined by the size of the cut through the wall or door; |
||||
We also offer doors that are LARGER than shown on the above chart; please call us at 1-800-829-7876 for assistance.
If you need a door in a specific time frame, please call us.
|
||||
A specification / data sheet will be kept on file for reference with Moore Pet Supplies LLC & Security Boss Manufacturing LLC for any future replacement parts that may need to be ordered.
|
Pricing for these custom doors is based on Rough Cut Dimensions
(width x height of your opening = Total sq. inches in chart below)
MaxSeal Custom Made Doors
|
||