These Patio Inserts are a stock items and ship within 24 hours (business days),
custom models require 1-3 business days to fabricate. All units ship via UPS.
Measuring for the Patio Pet Door:
To determine which height range will work with your slider, open the slider and measure from the very bottom inside track to the very top inside track. As you look down on the groove that the slider follows on the floor, you may see a thin rail. You will want to measure down past that rail, from the deepest part of the channel on the floor to the very top inside channel above.
Will These Patio Pet doors fit all Sliding Doors?
As you look at the track on the floor your slider follows; you most often will see a "rail". If this "rail" is narrower than 5/8" (as you look down on it), then the Ideal Patio Insert should fit your slider.
(We cannot guarantee fits as manufacturers are constantly coming out with new designs, but call us if you have any questions at 1-800-829-7876).
What is the Rise?:
This is the distance that the bottom of the pet opening is positioned off of the ground and the distance that the pet will have to step over to use the pet door.
There are several different rise options available (2.5, 4, 8, and 12 inches) to accommodate different pets.
: Larger rise options are not available on smaller pet openings
Draft Stopper / Weather stripping:
The draftstopper is a wide vinyl weather stripping section that attaches to the back side of your sliding door. When an insert is installed, your sliding door breaks the seal between the slider and fixed panel. This weather stripping will seal out any drafts.
Adjustable Height Range:
The top section of the Ideal Patio Pet Door floats on two tension rods that compress or expand to obtain the best possible fit in the patio door frame. The top is fit into the upper patio slider track and the bottom rests on the bottom slider track. Once in place, there are two thumb bolts that lock the top section into place to prevent the Patio Pet door from being removed from the outside.
How does my Sliding Door Lock?
Each Patio Pet Door comes with a locking pin mechanism to use if you choose. We strongly suggest bracing the door with a stick or an adjustable brace bar; as this immobilizes your slider and is the most effective way to secure your sliding door.
Different ways to Install the Patio Pet Door:
The Ideal Patio Pet Door can be mounted on the stationary side of the patio door. Many patio doors have stoppers that normally prevent the stationary panel from moving. If these stoppers can be removed, the stationary panel can be moved to accommodate the patio panel.
Note: This technique will not work on patio doors where the stationary panel is molded into the frame.
Extensions for "Custom" Ranges:
Ideal makes 3 different height ranges of patio pet doors: Regular, Shorty & Tall. For customers who have a slider height that falls between these 3 ranges, we have custom extensions made so that we can fit any height from 75" to 106" tall. These extensions slide in at the top of the insert. Some customers use a couple of screws to stabilize the extension piece. ( See picture in chart below for custom extension piece
Weather Seal Foam Bumper:
Each Patio Pet Door comes with a foam bumper so your slider will gently rest against the Patio Pet door. This foam bumper will also help to seal out drafts and bugs.
Security Panel to Lock Pet Opening:
The Ideal Patio Pet Door also comes with a slide-in panel to restrict pet access.